To improve the user experience on this site we use cookies. I agree | I disagree

User Modules are representing mechanism to extend functionality of cellular router devices. You can perceive these as something extra as it is not part of the firmware.

User Modules can be developed by our R&D, by Support, partners or by users itself. If you want to develop your own User Module, continue by reading the DevZone pages.

Following list represents User Modules that are developed by Advantech Czech s.r.o.

The list is not final one because there are several categories of user modules:

  1. Free use user modules. This list is shown to not-signed users.
  2. Restricted user modules. These User Modules are shown to the users with account. Modules in the resctricted category are usually limited in functionality (e.g. made for one specific use case and not really usable in other situations) or may cause problems when used improperly (causing the router to restart or not boot at all).
  3. Paid and Special user modules. These User Modules are not distributed via Engineering Portal.

Please note that actually most of the Modules were developed for particular setup with specific configuration in mind so it may not work 100% for different setup. If that is your case, feel free to contact our business representatives to find out possibilities to adapt the User Module to your needs.

Available modules


AT Modem Emulator

Categories:V2V3Industrial protocol conversion
Version:1.0.4
Release date:
03.10.2018
Description:

Emulation of telephone modem behavior.

Downloads:

atModemEmulator.v3.tgz

atModemEmulator.v2.tgz

AT_Modem_Emulator_Application_Note_20181122.pdfEnglish

Azure IoT SDK Python

Categories:V3IIoTProgramming
Version:1.0.0
Release date:
29.03.2018
Description:

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

Downloads:

azure_iot_sdk_python.v3.tgz

Azure_IoT_SDK_Python_Application_note_20200225.pdfEnglish

Azure IoT SDK Python3 API Version 2

Categories:V3IIoTProgramming
Version:2.0.0
Release date:
17.01.2020
Description:

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

Downloads:

azure_iot_sdk_python_v2.v3.tgz

Azure_IoT_SDK_Python_Application_note_20200225.pdfEnglish

Band Select

Categories:V2V3Tool
Version:1.2.1
Release date:
19.08.2019
Description:

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

Downloads:

bandsel.v3.tgz

bandsel.v2.tgz

BandSelect_Application_note_20200320.pdfEnglish

Captive Portal

Categories:V2V3SecurityTool
Version:1.1.2
Release date:
16.01.2020
Description:

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

Downloads:

captive_portal.v3.tgz

captive_portal.v2.tgz

Captive_Portal_Application_note_20200116.pdfEnglish

Cumulocity

Categories:V2V3
Version:2.0.0
Release date:
10.06.2019
Description:

Agent for Cumulocity IoT cloud platform.

Downloads:

cumulocity.v2.tgz

cumulocity.v3.tgz

Cumulocity_Agent_Application_note_20191129.pdf

CURL

Categories:V2V3Tool
Version:1.1.0
Release date:
14.03.2017
Description:

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

Downloads:

curl.v2.tgz

curl.v3.tgz

Customer Logo

Categories:V2V3
Version:1.0.0
Release date:
04.03.2020
Description:

This module allows the user to change the logo displayed in the header of the web interface.

Downloads:

customerlogo.v2.tgz

customerlogo.v3.tgz

Customer_Logo_Application_Note_20200304.pdfEnglish

Daily Reboot

Categories:V2V3Tool
Version:1.1.2
Release date:
27.09.2018
Description:

Configurable daily router reboot.

Downloads:

dailyReboot.v3.tgz

dailyReboot.v2.tgz

DailyReboot_Application_note_20181122.pdfEnglish

DNP3 Outstation

Categories:V2V3Industrial protocol conversion
Version:1.1.0
Release date:
14.03.2017
Description:

Allows the router I/Os to act like DNP3 slave device.

Downloads:

dnpOut.v2.tgz

dnpOut.v3.tgz

DNP3_Outstation_Application_note_20181122.pdfEnglish

EasyVPN Client

Categories:V2V3Security
Version:1.0.7
Release date:
27.09.2018
Description:

Provides secure (encrypted) connection between two LAN networks.

Downloads:

easyVpn.v3.tgz

easyVpn.v2.tgz

EasyVPNclient_Application_note_20181123.pdfEnglish

Ethernet Mirroring

Categories:V2V3Tool
Version:1.0.0
Release date:
25.10.2018
Description:

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

Downloads:

eth_mirror.v2.tgz

eth_mirror.v3.tgz

Ethernet_Mirroring_Application_Note_20181128.pdfEnglish

Ethernet Port Detector

Categories:V2V3Security
Version:1.0.1
Release date:
26.05.2014
Description:

Detects physical disconnection of an Ethernet cable and drops eth0 interface.

Downloads:

ethernet_port.tgz

Ethernet_Port_Detector_Application_note_20181123.pdfEnglish

Ext4_tools

Categories:V3Tool
Version:1.0.0
Release date:
27.02.2016
Description:

Adds the ability to create ext4 file systems, check them and mount them. Intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer. This user module is intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer.

Downloads:

ext4_tools.v3.tgz

Ext4_tools_Application_note_20181123.pdfEnglish

File Uploader

Categories:V2V3Tool
Version:1.2.3
Release date:
16.01.2019
Description:

Periodic sending System log and Report files to the selected email address or FTP server.

Downloads:

fileUploader.v3.tgz

fileUploader.v2.tgz

File_Uploader_Application_note_20190121.pdfEnglish

FOTA

Categories:V3Tool
Version:1.8.0
Release date:
16.09.2019
Description:

Firmware Over-The-Air (FOTA) user module allows router to wirelessly upgrade and update the operating firmware of a cellular module. Currently, only a few cellular modules are supported.

Downloads:

fota.v3.tgz

FOTA_Step_by_Step_20190131.pdfEnglish

Firmware_Over-The-Air_Application_Note_20190131.pdfEnglish

GDB (GNU Debugger)

Categories:V2V3Tool
Version:1.0.0
Release date:
30.04.2014
Description:

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

Downloads:

gdb.v2.tgz

gdb.v3.tgz

GPS

Categories:V2V3Tool
Version:1.6.9
Release date:
27.01.2020
Description:

GPS/GNSS receiver support.

Downloads:

gps.v3.tgz

gps.v2.tgz

GPS_Application_note_20200224.pdfEnglish

HMPClient

Categories:V2V3Tool
Version:1.4.0
Release date:
16.08.2017
Description:

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

Downloads:

hmpclient.v2.tgz

hmpclient.v3.tgz

IPSec-Tools

Categories:V2V3SecurityNetworking
Version:1.0.1
Release date:
30.03.2016
Description:

IPSec-Tools is used for IPsec configuration. This user module uses Racoon instead of OpenSwan.

Downloads:

ipsec_tools.v2.tgz

ipsec_tools.v3.tgz

L2TP Pseudowire

Categories:V2V3Networking
Version:1.0.5
Release date:
27.09.2018
Description:

Layer-2 protocols in a pseudo-wire configuration.

Downloads:

l2tpPseudowire.v2.tgz

l2tpPseudowire.v3.tgz

Layer 2 Firewall (L2FW)

Categories:V2V3SecurityNetworking
Version:1.0.0
Release date:
17.04.2017
Description:

Allows filtering based on defined list of MAC addresses.

Downloads:

l2fw.v2.tgz

l2fw.v3.tgz

Layer_2_Firewall_Application_Note_20181127.pdfEnglish

Loopback

Categories:V2V3Tool
Version:1.1.0
Release date:
12.06.2018
Description:

Virtual interface for management. 

Downloads:

loopback.v2.tgz

loopback.v3.tgz

Loopback_Application_Note_20190329.pdfEnglish

Midnight Commander

Categories:V2V3Tool
Version:4.5.55
Release date:
13.07.2019
Description:

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

Downloads:

mc.v2.tgz

mc.v3.tgz

Modbus logger

Categories:V2V3Industrial protocol conversion
Version:1.1.0
Release date:
19.10.2018
Description:

Reads Modbus RTU slaves and uploads data to SFTP server.

Downloads:

modbus_logger.v3.tgz

modbus_logger.v2.tgz

Modbus_Logger_Application_note_20181102.pdfEnglish

Modem Bonding

Categories:V2V3Networking
Version:1.0.12
Release date:
27.09.2018
Description:

Data aggregation using more WAN connections (requires third party server).

Downloads:

modBond.v3.tgz

modBond.v2.tgz

Modem_Bonding_Application_note_20181127.pdfEnglish

NAT

Categories:V2V3
Version:1.1.0
Release date:
28.05.2020
Description:

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT).

Downloads:

nat.v2.tgz

nat.v3.tgz

NMAP

Categories:V2V3Tool
Version:1.0.1
Release date:
22.11.2011
Description:

This user module provides TCP and UDP scan.

Downloads:

nmap.tgz

NMAP_Application_note_20181128.pdfEnglish

Node-RED

Categories:V3IIoTNode-RED
Version:1.1.3
Release date:
17.08.2018
Description:

Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways.

Downloads:

nodered.v3.tgz

Node-RED_Application_Note_20190215.pdfEnglish

Node-RED FTP Node

Categories:V3IIoTNode-RED
Version:1.0.1
Release date:
17.08.2018
Description:

You can do the basic ftp commands LIST, GET, PUT and DELETE on a ftp server with this node. For detailed description see the Node-RED Application Note above.

Downloads:

noderedftp.v3.tgz

Node-RED GPSd Node

Categories:V3IIoTNode-RED
Version:1.0.1
Release date:
17.08.2018
Description:

GPSd node receives the GPS events as payload via gpsd daemon. You can filter which events you are interested in. For detailed description see the Node-RED Application Note above.

Downloads:

noderedgpsd.v3.tgz

Node-RED gzip Node

Categories:V3IIoTNode-RED
Version:1.0.1
Release date:
17.08.2018
Description:

This node compresses an open node payload or decompress a compressed node payload by gzip compression. For detailed description see the Node-RED Application Note above.

Downloads:

noderedgzip.v3.tgz

Node-RED KNX Node

Categories:V3IIoTNode-RED
Version:1.0.0
Release date:
02.05.2019
Description:

Adding this user module to the router will add the knx device, knx out and knx in nodes to the iot node list. These nodes add KNXnet/IP support for Node-RED so it is possible to talk to KNX both in raw form and as higher level devices. KNX is an open standard for commercial and domestic building automation. For detailed description see the Node-RED Application Note above.

Downloads:

noderedknx.v3.tgz

Node-RED Modbus Node

Categories:V3IIoTNode-RED
Version:1.0.0
Release date:
17.08.2018
Description:

Contains the nodes for working with Modbus, both the serial and TCP variants. You can read the values from a device and update a device state via a serial line. With TCP client you can read the registred values and write to a coil or a register. For detailed description see the Node-RED Application Note above.

Downloads:

noderedmodbus.v3.tgz

Node-RED MQTT Node

Categories:V3IIoTNode-RED
Version:1.0.0
Release date:
09.10.2018
Description:

Contains the MQTT Broker node to create a MQTT server for your IoT. The client nodes are part of the base Node-RED module. For detailed description see the Node-RED Application Note above.

Downloads:

noderedmqtt.v3.tgz

Node-RED Splunk Node

Categories:V3IIoTNode-RED
Version:1.0.0
Release date:
15.02.2019
Description:

Allows Node-RED to publish a node payload to Splunk's HTTP Event Collector. For detailed description see the Node-RED Application Note above.

Downloads:

noderedsplunk.v3.tgz

Node.js

Categories:V3IIoTNode-RED
Version:1.2.1
Release date:
17.08.2018
Description:

Node.js is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient. For detailed description see the Node-RED Application Note above.

Downloads:

nodejs.v3.tgz

NTRIP Client

Categories:V2V3Tool
Version:1.0.4
Release date:
10.03.2017
Description:

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

Downloads:

ntripClient.v2.tgz

ntripClient.v3.tgz

NtripClient_Application_note_20181128.pdfEnglish

OpenVPN custom config

Categories:V2V3SecurityTool
Version:1.0.2
Release date:
18.06.2018
Description:

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

Downloads:

openvpn_custom_config.v2.tgz

openvpn_custom_config.v3.tgz

OpenVPN_Custom_Config_Application_note_20181128.pdfEnglish

Operating Hours Counter

Categories:V2V3Tool
Version:1.0.1
Release date:
24.09.2016
Description:

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

Downloads:

ophrscounter.v2.tgz

ophrscounter.v3.tgz

Operational_Hours_Counter_Application_note_20181128.pdfEnglish

Packet Splitter

Categories:V2V3Industrial protocol conversion
Version:1.1.0
Release date:
17.03.2017
Description:

Duplicates data flow to more targets (up to seven different connections).

Downloads:

packetSplitter.v2.tgz

packetSplitter.v3.tgz

Packet_Splitter_Application_note_20181128.pdfEnglish

PduSMS

Categories:V2V3Tool
Version:1.1.1
Release date:
27.09.2018
Description:

Allows to send SMS messages longer than standard of 160 characters.

Downloads:

pduSMS.v3.tgz

pduSMS.v2.tgz

pduSMS_Application_note_20181128.pdfEnglish

Pinger

Categories:V2V3Tool
Version:2.3.3
Release date:
27.09.2018
Description:

Manually or automatically verifies functionality of connection between Smart Router and a device eventually of two devices. Ping and traceroute are used for this purpose.

Downloads:

pinger.v2.tgz

pinger.v3.tgz

Pinger_Application_note_20181129.pdfEnglish

CONEL_AVAILABILITY_MIB.my

pppGateway

Categories:V2V3Networking
Version:1.1.0
Release date:
17.03.2017
Description:

Establishes connection via PPP between router and device on serial line.

Downloads:

pppGateway.v2.tgz

pppGateway.v3.tgz

PPPGateway_Application_note_20181129.pdfEnglish

Protocol ALPHA-MODBUS

Categories:V2V3Industrial protocol conversion
Version:1.4.1
Release date:
27.09.2018
Description:

Converts data from Mitsubishi ALPHA2 to Modbus TCP.

Downloads:

alpha.v3.tgz

alpha.v2.tgz

ALPHA-MODBUS_application_note_20181129.pdfEnglish

Protocol BGP

Categories:V2V3Networking
Version:1.6.0
Release date:
08.08.2018
Description:

Adds support of the BGP routing protocol which allows to route between autonomous systems.

Downloads:

bgp.v2.tgz

bgp.v3.tgz

BGP_Application_note_20181129.pdfEnglish

Protocol DF1-Ethernet

Categories:V2V3Industrial protocol conversion
Version:1.1.1
Release date:
27.09.2018
Description:

Converts DF1 serial protocol to TCP/IP.

Downloads:

abcsp2df1.v3.tgz

abcsp2df1.v2.tgz

DF1-Ethernet_Application_note_20181129.pdfEnglish

Protocol IEC101-104

Categories:V2V3Industrial protocol conversion
Version:1.2.0
Release date:
14.08.2018
Description:

Converts IEC101 serial protocol to IEC104 IP protocol.

Downloads:

iec14.v3.tgz

iec14.v2.tgz

Protocol_IEC_101-104_Application_Note_20181012.pdfEnglish

Protocol IS-IS

Categories:V2V3Networking
Version:1.0.6
Release date:
11.03.2016
Description:

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

Downloads:

isis.v2.tgz

isis.v3.tgz

IS-IS_Application_note_20181129.pdfEnglish

Protocol MODBUS-RTU2TCP

Categories:V2V3Industrial protocol conversion
Version:1.1.1
Release date:
27.09.2018
Description:

Converts Modbus RTU messages to TCP and caching messages to external Flash memory.

Downloads:

rtu2tcp.v3.tgz

rtu2tcp.v2.tgz

Modbus_RTU2TCP_Application_note_20181129.pdfEnglish

Protocol MODBUS-RTUMAP

Categories:V2V3Industrial protocol conversion
Version:1.0.4
Release date:
15.01.2020
Description:

Converts serial protocol Modbus RTU from more Modbus slaves and mapping their data to one Modbus TCP connection.

Downloads:

rtuMap.v2.tgz

rtuMap.v3.tgz

RTUMAP_Application_note_20200115.pdfEnglish

Protocol MODBUS-TCP2RTU

Categories:V2V3Industrial protocol conversion
Version:1.6.1
Release date:
27.09.2018
Description:

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

Downloads:

tcp2rtu.v2.tgz

tcp2rtu.v3.tgz

Modbus_TCP2RTU_Application_note_20200506.pdfEnglish

Protocol NHRP

Categories:V2V3Networking
Version:1.1.0
Release date:
20.03.2017
Description:

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

Downloads:

nhrp.v2.tgz

nhrp.v3.tgz

DMVPN_Application_Note_20181129.pdfEnglish

Protocol OSPF

Categories:V2V3Networking
Version:1.6.0
Release date:
08.08.2018
Description:

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

Downloads:

ospf.v2.tgz

ospf.v3.tgz

OSPF_Application_note_20181129.pdfEnglish

Protocol PIM-SM

Categories:V2V3Networking
Version:1.2.1
Release date:
27.09.2018
Description:

Adds support of the PIM-SM multicast routing protocol.

Downloads:

pimSM.v3.tgz

pimSM.v2.tgz

PIM-SM_Application_note_20181130.pdfEnglish

Protocol RIP

Categories:V2V3Networking
Version:1.0.6
Release date:
11.03.2016
Description:

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

Downloads:

rip.v2.tgz

rip.v3.tgz

RIP_Application_note_20181130.pdfEnglish

Protocol SuiteHT

Categories:V2V3Tool
Version:1.1.0
Release date:
18.03.2017
Description:

Sends queries from the AMR (Automatic Meter Reading) system to a meter through an IP network using the router as a gateway.

Downloads:

suiteHT.v2.tgz

suiteHT.v3.tgz

Suite_HT_Application_note_20181130.pdfEnglish

Python

Categories:V2V3Programming
Version:2.7.15
Release date:
13.09.2019
Description:

Supports programming language Python 2.x.

Downloads:

python.v2.tgz

python.v3.tgz

Python3

Categories:V3
Version:3.5.4
Release date:
25.03.2020
Description:

Supports programming language Python 3.x.

Downloads:

python3.v3.tgz

SCEP Client

Categories:V2V3Security
Version:1.1.0
Release date:
18.03.2017
Description:

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

Downloads:

scepClient.v2.tgz

scepClient.v3.tgz

SCEP_Client_Application_note_20181130.pdfEnglish

SendReport

Categories:V2V3Tool
Version:1.0.1
Release date:
02.04.2016
Description:

Regular sending of System log and Report files to the specified email or FTP server.

Downloads:

sendReport.v2.tgz

sendReport.v3.tgz

SendReport_Application_note_20181130.pdfEnglish

Serial to network proxy

Categories:V2V3Industrial protocol conversion
Version:1.0.6
Release date:
15.01.2020
Description:

This module provides a way for a user to connect from a network connection to a serial port.

Downloads:

ser2net.v2.tgz

ser2net.v3.tgz

Serial_to_network_proxy_App_note_20200115_EN.pdfEnglish

Serial2TCP

Categories:V2V3Industrial protocol conversion
Version:1.2.1
Release date:
27.09.2018
Description:

Allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible.

Downloads:

serial2tcp.v3.tgz

serial2tcp.v2.tgz

Serial2TCP_Application_note_20181130.pdfEnglish

Service_acl

Categories:V2V3SecurityTool
Version:1.0.0
Release date:
03.02.2017
Description:

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

Downloads:

service_acl.v2.tgz

service_acl.v3.tgz

Sleep Mode

Categories:V3Tool
Version:1.0.0
Release date:
01.03.2019
Description:

Switch the router into Low Power Mode and wake it up. Advanced options based on binary inputs and time.

Downloads:

sleepmode.v3.tgz

Sleep_Mode_Application_Note_20190329.pdfEnglish

SSHClient

Categories:V2V3Tool
Version:1.0.1
Release date:
26.04.2014
Description:

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

Downloads:

sshclient.tgz

SSHclient_Application_note_20181130.pdfEnglish

Stunnel

Categories:V2V3SecurityNetworking
Version:1.0.4
Release date:
11.03.2016
Description:

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

Downloads:

stunnel.v2.tgz

stunnel.v3.tgz

Stunnel_Application_note_20181130.pdfEnglish

TCP SYN Keep-Alive

Categories:V2V3Tool
Version:1.1.0
Release date:
18.03.2017
Description:

Check of the TCP connection with a defined IP address.

Downloads:

tcpsynka.v2.tgz

tcpsynka.v3.tgz

TCP_SYN_Keep-Alive_Application_note_20181130.pdfEnglish

Transparent mode

Categories:V2V3Networking
Version:1.1.1
Release date:
15.11.2019
Description:

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

Downloads:

transparentMode.v3.tgz

transparentMode.v2.tgz

TransparentMode_Application_note_20191115.pdfEnglish

URL Blocker

Categories:V2V3Tool
Version:1.0.0
Release date:
21.02.2017
Description:

This user module can be used for blocking specific URLs on WiFi interface.

Downloads:

url_blocker.v2.tgz

url_blocker.v3.tgz

URL_Blocker_Application_Note_20181130.pdfEnglish

USB/IP Eltima

Categories:V3
Version:1.0.0
Release date:
15.10.2019
Description:

Integrates Eltima libraries into USB over Ethernet solution

Downloads:

usbip_eltima.v3.tgz

USB_IP Eltima_Application_Note_20200522.pdfEnglish

Vim

Categories:V2V3Tool
Version:8.1.1
Release date:
17.07.2019
Description:

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

Downloads:

vim.v2.tgz

vim.v3.tgz

VPN Portal

Categories:V2V3SecurityNetworking
Version:1.0.0
Release date:
04.09.2019
Description:

Connects the router to WebAccess/VPN, see WebAccess/VPN Software product page.

Downloads:

vpnportal.v2.tgz

vpnportal.v3.tgz

Web Terminal

Categories:V2V3Tool
Version:1.0.1
Release date:
02.03.2018
Description:

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

Downloads:

webTerm.v2.tgz

webTerm.v3.tgz

WebAccess/DMP Client

Categories:V2V3
Version:2.0.4
Release date:
16.04.2020
Description:

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP.

Downloads:

wadmp_client_2.0.4.v2.tgz

wadmp_client_2.0.4.v3.tgz

WiFi SSID Switch

Categories:V2V3Tool
Version:1.0.5
Release date:
27.09.2018
Description:

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

Downloads:

wifi_ssid_switch.v3.tgz

wifi_ssid_switch.v2.tgz

WiFi_SSID_Switch_Application_Note_20181130.pdfEnglish

WiFi STA Relay

Categories:V2V3NetworkingTool
Version:1.0.3
Release date:
23.01.2020
Description:

Transparent mode (WiFi interface in client mode bridged to ETH).

Downloads:

wifi_relay.v2.tgzEnglish

wifi_relay.v3.tgzEnglish

wM-BUS CONCENTRATOR

Categories:V2V3Industrial protocol conversion
Version:1.1.1
Release date:
27.09.2018
Description:

Data processing from Wireless M-Bus meters. XML files are used for this purpose.

Downloads:

wMBusConc.v3.tgz

wMBusConc.v2.tgz

wM-BUS_Concentrator_Application_note_20181130.pdf

WoLGateway

Categories:V2V3Tool
Version:1.1.1
Release date:
27.09.2018
Description:

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

Downloads:

WoLGateway.v3.tgz

WoLGateway.v2.tgz

WoL_Gateway_Application_note_20181130.pdfEnglish

XCCNT_Update

Categories:V2Tool
Version:1.0.0
Release date:
25.10.2017
Description:

Allows to reconfigure CNT board directly inside of router (intended for v2 routers only). There are three possible congurations:

  • 4x BI
  • 3x BI + 1x CNT
  • 2x BI + 2x CNT
Downloads:

xccnt_update.v2.tgz