Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

eth1x_auth.v3.tgz | 12 KB

eth1x_auth.v4.tgz | 12 KB

eth1x_auth.v2.tgz | 12 KB

802.1X_Authenticator_Application_Note_20200708.pdf | 1 MB

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

backup_apn.v2.tgz | 11 KB

backup_apn.v3.tgz | 11 KB

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v3.tgz | 23 KB

bandsel.v4.tgz | 23 KB

bandsel.v2.tgz | 24 KB

BandSelect_Application_note_20200618.pdf | 985 KB

Bluetooth support with Bluez 5.55 and D-Bus 1.12.20. Currently intended only for ICR-3200 series.

bluetooth.v3.tgz | 1 MB

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v3.tgz | 11 KB

eth_mirror.v4.tgz | 11 KB

eth_mirror.v2.tgz | 11 KB

Ethernet_Mirroring_Application_Note_20200618.pdf | 1010 KB

Allows filtering based on defined list of MAC addresses.

l2fw.v3.tgz | 10 KB

l2fw.v4.tgz | 10 KB

l2fw.v2.tgz | 10 KB

Layer_2_Firewall_Application_Note_20200618.pdf | 1023 KB

Data aggregation using more WAN connections (requires third party server).

modBond.v2.tgz | 489 KB

modBond.v3.tgz | 489 KB

Modem_Bonding_Application_note_20200618.pdf | 2 MB

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

nat.v3.tgz | 15 KB

nat.v4.tgz | 15 KB

nat.v2.tgz | 15 KB

NAT_Application_Note_20200619.pdf | 1019 KB

Establishes connection via PPP between router and device on serial line.

pppGateway.v2.tgz | 12 KB

pppGateway.v3.tgz | 12 KB

PPPGateway_Application_note_20200618.pdf | 1 MB

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

transparentMode.v3.tgz | 2 KB

transparentMode.v4.tgz | 2 KB

transparentMode.v2.tgz | 2 KB

TransparentMode_Application_note_20200618.pdf | 1 MB

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v3.tgz | 184 KB

url_blocker.v4.tgz | 188 KB

url_blocker.v2.tgz | 188 KB

URL_Blocker_Application_Note_20200618.pdf | 1 MB

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

wifi_ssid_switch.v3.tgz | 18 KB

wifi_ssid_switch.v2.tgz | 18 KB

WiFi_SSID_Switch_Application_Note_20200618.pdf | 1 MB

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v4.tgz | 29 KB

wifi_relay.v3.tgz | 28 KB

wifi_relay.v2.tgz | 28 KB