To improve the user experience on this site we use cookies. I agree | I disagree

Available modules for category v2


802.1X Authenticator

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

Downloads:

eth1x_auth.v2.tgz | 12 KB

802.1X_Authenticator_Application_Note_20200708.pdf | 1 MB

AT Modem Emulator

Categories:V2
Version:1.0.4
Release date:
03.10.2018
Description:

Emulation of telephone modem behavior.

Downloads:

atModemEmulator.v2.tgz | 30 KB

AT_Modem_Emulator_Application_Note_20200618.pdf | 1 MB

Azure IoT SDK Python

Categories:V2
Version:1.0.0
Release date:
01.10.2020
Description:

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

Downloads:

azure_iot_sdk_python.v2.tgz | 25 MB

Azure_IoT_SDK_Python_Application_note_2020618.pdf | 1 MB

Azure IoT SDK Python3 API Version 2

Categories:V2
Version:2.0.0
Release date:
01.10.2020
Description:

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

Downloads:

azure_iot_sdk_python_v2.v2.tgz | 821 KB

Azure_IoT_SDK_Python_Application_note_20200225.pdf | 805 KB

Backup APN

Categories:V2
Version:1.1.0
Release date:
26.05.2020
Description:

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

Downloads:

backup_apn.v2.tgz | 11 KB

Band Select

Categories:V2
Version:1.3.0
Release date:
01.10.2020
Description:

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

Downloads:

bandsel.v2.tgz | 24 KB

BandSelect_Application_note_20200618.pdf | 985 KB

Captive Portal

Categories:V2
Version:1.3.2
Release date:
19.11.2020
Description:

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

Downloads:

captive_portal.v2.tgz | 666 KB

Captive_Portal_Application_note_20200618.pdf | 1 MB

Cumulocity

Categories:V2
Version:2.2.0
Release date:
27.12.2020
Description:

Agent for Cumulocity IoT cloud platform.

Downloads:

cumulocity.v2.tgz | 1 MB

Cumulocity_Agent_Application_note_20201124.pdf | 3 MB

CURL

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

Downloads:

curl.v2.tgz | 845 KB

Customer Logo

Categories:V2
Version:1.0.0
Release date:
04.03.2020
Description:

This module allows the user to change the logo displayed in the header of the web interface.

Downloads:

customerlogo.v2.tgz | 10 KB

Customer_Logo_Application_Note_20200618.pdf | 887 KB

Daily Reboot

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

Configurable daily router reboot.

Downloads:

dailyReboot.v2.tgz | 10 KB

DailyReboot_Application_note_20200618.pdf | 976 KB

DHCP based on MAC OUI

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Allows only OUI in MAC field in router's DHCP configuration.

Downloads:

dhcpMacOui.v2.tgz | 11 KB

DHCP Relay (over IPsec)

Categories:V2
Version:1.0.0
Release date:
21.08.2020
Description:

This user module provides the DHCP relay agent to enable the communication from a DHCP server to DHCP clients on subnets other than the one the server resides on. It must be used together with route-based IPSec.

Downloads:

dhcp_relay.v2.tgz | 172 KB

DHCP_Relay_Application_Note_20201105.pdf | 1 MB

DNP3 Outstation

Categories:V2
Version:1.1.0
Release date:
14.03.2017
Description:

Allows the router I/Os to act like DNP3 slave device.

Downloads:

dnpOut.v2.tgz | 42 KB

DNP3_Outstation_Application_note_20200618.pdf | 1 MB

EasyVPN Client

Categories:V2
Version:1.0.7
Release date:
27.09.2018
Description:

Provides secure (encrypted) connection between two LAN networks.

Downloads:

easyVpn.v2.tgz | 659 KB

EasyVPNclient_Application_note_20200618.pdf | 1 MB

Ethernet Mirroring

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

Downloads:

eth_mirror.v2.tgz | 11 KB

Ethernet_Mirroring_Application_Note_20200618.pdf | 1010 KB

Ethernet Port Detector

Categories:V2
Version:1.0.1
Release date:
26.05.2014
Description:

Detects physical disconnection of an Ethernet cable and drops eth0 interface.

Downloads:

ethernet_port.tgz | 327 KB

Ethernet_Port_Detector_Application_note_20200618.pdf | 1 MB

File Uploader

Categories:V2
Version:1.3.0
Release date:
01.10.2020
Description:

Periodic sending System log and Report files to the selected email address or FTP server.

Downloads:

fileUploader.v2.tgz | 863 KB

File_Uploader_Application_note_20200618.pdf | 1 MB

FOTA

Categories:V2
Version:1.9.0
Release date:
16.09.2019
Description:

Firmware Over-The-Air (FOTA) user module allows router to wirelessly upgrade and update the operating firmware of a cellular module. Currently, only a few cellular modules are supported.

Downloads:

fota.v2.tgz | 158 KB

FOTA_Manual_update_Application_Note_20190131.pdf | 2 MB

GDB (GNU Debugger)

Categories:V2
Version:1.0.0
Release date:
30.04.2014
Description:

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

Downloads:

gdb.v2.tgz | 1 MB

GPS

Categories:V2
Version:1.8.0
Release date:
01.09.2020
Description:

GPS/GNSS receiver support.

Downloads:

gps.v2.tgz | 170 KB

GPS_Application_note_20200921.pdf | 1024 KB

HMPClient

Categories:V2
Version:1.7.0
Release date:
15.02.2019
Description:

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

Downloads:

hmpclient.tgz | 574 KB

HTTPS Login Banner

Categories:V2
Version:1.2.1
Release date:
10.06.2020
Description:

Allows user to embed information banner ahead of the login form.

Downloads:

httpBanner.v2.tgz | 479 KB

HTTP_Banner_Application_note_20200618.pdf | 975 KB

IPSec-Tools

Categories:V2
Version:1.0.1
Release date:
30.03.2016
Description:

IPSec-Tools is used for IPsec configuration. This user module uses Racoon instead of OpenSwan.

Downloads:

ipsec_tools.v2.tgz | 632 KB

L2TP Pseudowire

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Layer-2 protocols in a pseudo-wire configuration.

Downloads:

l2tpPseudowire.v2.tgz | 12 KB

Layer 2 Firewall (L2FW)

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Allows filtering based on defined list of MAC addresses.

Downloads:

l2fw.v2.tgz | 10 KB

Layer_2_Firewall_Application_Note_20200618.pdf | 1023 KB

Loopback

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

Virtual interface for management. 

Downloads:

loopback.v2.tgz | 9 KB

Loopback_Application_Note_20200618.pdf | 1 MB

LUA

Categories:V2
Version:5.3.5
Release date:
27.05.2020
Description:

Supports scripting language that combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics.

Downloads:

lua.v2.tgz | 271 KB

lualibmodbus.v2.tgz | 73 KB

Midnight Commander

Categories:V2
Version:4.5.55
Release date:
13.07.2019
Description:

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

Downloads:

mc.v2.tgz | 224 KB

Modbus logger

Categories:V2
Version:1.1.0
Release date:
19.10.2018
Description:

Reads Modbus RTU slaves and uploads data to SFTP server.

Downloads:

modbus_logger.v2.tgz | 22 KB

Modbus_Logger_Application_note_20200618.pdf | 1 MB

Modbus to LwM2M

Categories:V2
Version:1.0.7
Release date:
28.08.2020
Description:

Provides seamless communication between Modbus/TCP devices and LwM2M device.

Downloads:

ModbusToLwM2M.v2.tgz | 300 KB

Modbus_to_LwM2M_Application_Note_20200828.pdf | 1 MB

Modbus to MQTT

Categories:V2
Version:2.0.0
Release date:
28.08.2020
Description:

Provides seamless communication between Modbus/TCP devices and  MQTT device.

Downloads:

ModbusToMqtt.v2.tgz | 261 KB

Modbus_to_MQTT_Application_Note_20200828.pdf | 1013 KB

Modem Bonding

Categories:V2
Version:1.0.12
Release date:
27.09.2018
Description:

Data aggregation using more WAN connections (requires third party server).

Downloads:

modBond.v2.tgz | 489 KB

Modem_Bonding_Application_note_20200618.pdf | 2 MB

NAT

Categories:V2
Version:1.3.0
Release date:
01.10.2020
Description:

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

Downloads:

nat.v2.tgz | 15 KB

NAT_Application_Note_20200619.pdf | 1019 KB

NetFlow/IPFIX

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

User module NetFlow/IPFIX is determined for monitoring network traffic. NetFlow enabled routers have a probe that collects IP traffic information and submits them to a NetFlow collector and analyzer.

Downloads:

netflow.v2.tgz | 537 KB

NetFlow-IPFIX_Application_Note_20200729.pdf | 1 MB

NMAP

Categories:V2
Version:1.0.2
Release date:
02.01.2019
Description:

This user module provides TCP and UDP scan.

Downloads:

nmap.v2.tgz | 113 KB

NMAP_Application_note_20200618.pdf | 1 MB

NTP

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

Downloads:

ntp.v2.tgz | 375 KB

NTPv4_Application_Note_20200709.pdf | 942 KB

NTRIP Client

Categories:V2
Version:1.0.4
Release date:
10.03.2017
Description:

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

Downloads:

ntripClient.v2.tgz | 30 KB

NtripClient_Application_note_20200618.pdf | 1 MB

OpenVPN custom config

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

Downloads:

openvpn_custom_config.v2.tgz | 11 KB

OpenVPN_Custom_Config_Application_note_20200618.pdf | 1 MB

Operating Hours Counter

Categories:V2
Version:1.0.1
Release date:
24.09.2016
Description:

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

Downloads:

ophrscounter.v2.tgz | 20 KB

Operational_Hours_Counter_Application_note_20200618.pdf | 976 KB

Packet Splitter

Categories:V2
Version:1.3.0
Release date:
01.10.2020
Description:

Duplicates data flow to more targets (up to seven different connections).

Downloads:

packetSplitter.v2.tgz | 20 KB

Packet_Splitter_Application_note_20200618.pdf | 1 MB

PduSMS

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

Allows to send SMS messages longer than standard of 160 characters.

Downloads:

pduSMS.v2.tgz | 10 KB

pduSMS_Application_note_20200618.pdf | 1016 KB

Pinger

Categories:V2
Version:2.4.0
Release date:
01.10.2020
Description:

Manually or automatically verifies functionality of connection between Smart Router and a device eventually of two devices. Ping and traceroute are used for this purpose.

Downloads:

pinger.v2.tgz | 29 KB

Pinger_Application_note_20200618.pdf | 1 MB

CONEL_AVAILABILITY_MIB.my | 1 KB

pppGateway

Categories:V2
Version:1.1.0
Release date:
17.03.2017
Description:

Establishes connection via PPP between router and device on serial line.

Downloads:

pppGateway.v2.tgz | 12 KB

PPPGateway_Application_note_20200618.pdf | 1 MB

Protocol ALPHA-MODBUS

Categories:V2
Version:1.4.1
Release date:
27.09.2018
Description:

Converts data from Mitsubishi ALPHA2 to Modbus TCP.

Downloads:

alpha.v2.tgz | 38 KB

ALPHA-MODBUS_application_note_20200618.pdf | 1 MB

Protocol BGP

Categories:V2
Version:1.8.0
Release date:
01.10.2020
Description:

Adds support of the BGP routing protocol which allows to route between autonomous systems.

Downloads:

bgp.v2.tgz | 466 KB

BGP_Application_note_20200618.pdf | 1 MB

Protocol DF1-Ethernet

Categories:V2
Version:1.1.1
Release date:
27.09.2018
Description:

Converts DF1 serial protocol to TCP/IP.

Downloads:

abcsp2df1.v2.tgz | 38 KB

DF1-Ethernet_Application_note_20200618.pdf | 972 KB

Protocol IEC101-104

Categories:V2
Version:1.2.1
Release date:
13.03.2020
Description:

Converts IEC101 serial protocol to IEC104 IP protocol.

Downloads:

iec14.v2.tgz | 43 KB

Protocol_IEC_101-104_Application_Note_20200618.pdf | 1 MB

Protocol IS-IS

Categories:V2
Version:1.8.0
Release date:
01.10.2020
Description:

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

Downloads:

isis.v2.tgz | 352 KB

IS-IS_Application_note_20200618.pdf | 1 MB

Protocol MODBUS-RTU2TCP

Categories:V2
Version:1.1.1
Release date:
27.09.2018
Description:

Converts Modbus RTU messages to TCP and caching messages to external Flash memory.

Downloads:

rtu2tcp.v2.tgz | 20 KB

Modbus_RTU2TCP_Application_note_20200618.pdf | 2 MB

Protocol MODBUS-RTUMAP

Categories:V2
Version:1.0.4
Release date:
15.01.2020
Description:

Converts serial protocol Modbus RTU from more Modbus slaves and mapping their data to one Modbus TCP connection.

Downloads:

rtuMap.v2.tgz | 19 KB

RTUMAP_Application_note_20200618.pdf | 1 MB

Protocol MODBUS-TCP2RTU

Categories:V2
Version:1.6.1
Release date:
27.09.2018
Description:

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

Downloads:

tcp2rtu.v2.tgz | 27 KB

Modbus_TCP2RTU_Application_note_20200618.pdf | 969 KB

Protocol NHRP

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

Downloads:

nhrp.v2.tgz | 70 KB

DMVPN_Application_Note_20181129.pdf | 1 MB

Protocol OSPF

Categories:V2
Version:1.8.0
Release date:
01.10.2020
Description:

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

Downloads:

ospf.v2.tgz | 407 KB

OSPF_Application_note_20200618.pdf | 1 MB

Protocol PIM-SM

Categories:V2
Version:1.3.0
Release date:
27.09.2018
Description:

Adds support of the PIM-SM multicast routing protocol.

Downloads:

pimSM.v2.tgz | 66 KB

PIM_SM_Application_note_20200618.pdf | 1 MB

Protocol RIP

Categories:V2
Version:1.8.0
Release date:
04.06.2020
Description:

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

Downloads:

rip.v2.tgz | 306 KB

RIP_Application_note_20200618.pdf | 1 MB

Protocol SuiteHT

Categories:V2
Version:1.1.0
Release date:
18.03.2017
Description:

Sends queries from the AMR (Automatic Meter Reading) system to a meter through an IP network using the router as a gateway.

Downloads:

suiteHT.v2.tgz | 19 KB

Suite_HT_Application_note_20200618.pdf | 1 MB

Python

Categories:V2
Version:2.7.18
Release date:
01.10.2020
Description:

Supports programming language Python 2.x. This UM requires at least 8 MB of free space for user data.

Downloads:

python.v2.tgz | 5 MB

Python3

Categories:V2
Version:3.7.9
Release date:
06.11.2020
Description:

Supports programming language Python 3.x. This UM requires at least 8 MB of free space for user data.

Downloads:

python3.v2.tgz | 6 MB

Python3 with pip

Categories:V2
Version:3.7.9
Release date:
19.11.2020
Description:

Supports programming language Python 3.x with pip (tool for installing and managing software packages written in Python). This UM supports only packages that does not require any additional compilation. It is required at least 10 MB of free space for user data.

Downloads:

python3_with_pip.v2.tgz | 8 MB

Samba

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Windows Share (samba) on the Router for directory /var/data/samba. The UM also supports NetBIOS nameserver.

Downloads:

samba.v2.tgz | 6 MB

SCEP Client

Categories:V2
Version:1.1.0
Release date:
18.03.2017
Description:

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

Downloads:

scepClient.v2.tgz | 406 KB

SCEP_Client_Application_note_20200618.pdf | 1 MB

Secure Syslog

Categories:V2
Version:1.0.0
Release date:
02.12.2020
Description:

The module implements an enhanced syslog client (sender) that can forward syslog messages to a server (receiver) over a secure TLS protocol as defined in RFC 5425.

Downloads:

secure_syslog.v2.tgz | 1 MB

Secure_Syslog_Application_Note_20210210.pdf | 1 MB

SendReport

Categories:V2
Version:1.0.1
Release date:
02.04.2016
Description:

Regular sending of System log and Report files to the specified email or FTP server.

Downloads:

sendReport.v2.tgz | 64 KB

SendReport_Application_note_20200618.pdf | 1021 KB

Serial to network proxy

Categories:V2
Version:1.0.6
Release date:
27.09.2018
Description:

This module provides a way for a user to connect from a network connection to a serial port.

Downloads:

ser2net.v2.tgz | 51 KB

Serial_to_network_proxy_App_note_20200618.pdf | 1017 KB

Serial2TCP

Categories:V2
Version:1.2.1
Release date:
27.09.2018
Description:

Allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible.

Downloads:

serial2tcp.v2.tgz | 20 KB

Serial2TCP_Application_note_20200618.pdf | 1 MB

Service Access Limitation

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

Downloads:

service_acl.v2.tgz | 12 KB

SSHClient

Categories:V2
Version:1.0.1
Release date:
26.04.2014
Description:

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

Downloads:

sshclient.tgz | 180 KB

SSHclient_Application_note_20200618.pdf | 1 MB

Stunnel

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

Downloads:

stunnel.v2.tgz | 583 KB

Stunnel_Application_note_20200618.pdf | 1 MB

TCP SYN Keep-Alive

Categories:V2
Version:1.2.0
Release date:
01.10.2020
Description:

Check of the TCP connection with a defined IP address.

Downloads:

tcpsynka.v2.tgz | 12 KB

TCP_SYN_Keep-Alive_Application_note_20200618.pdf | 1016 KB

Transparent mode

Categories:V2
Version:1.1.2
Release date:
19.06.2020
Description:

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

Downloads:

transparentMode.v2.tgz | 2 KB

TransparentMode_Application_note_20200618.pdf | 1 MB

URL Blocker

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

This user module can be used for blocking specific URLs on WiFi interface.

Downloads:

url_blocker.v2.tgz | 188 KB

URL_Blocker_Application_Note_20200618.pdf | 1 MB

Vim

Categories:V2
Version:8.1.1
Release date:
17.07.2019
Description:

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

Downloads:

vim.v2.tgz | 355 KB

Web Terminal

Categories:V2
Version:1.1.0
Release date:
01.10.2020
Description:

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

Downloads:

webTerm.v2.tgz | 33 KB

WebAccess/DMP Client

Categories:V2
Version:2.0.10
Release date:
11.02.2021
Description:

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP.

Downloads:

wadmpC.v2.tgz | 548 KB

Changelog (TXT) | 1 KB

WebAccess/VPN (VPN Portal)

Categories:V2
Version:1.1.1
Release date:
01.10.2020
Description:

Connects the router to WebAccess/VPN (VPN Portal), see WebAccess/VPN Software product page.Note for compatibility: always use the same version of user module in router and server version of WebAccess/VPN.

Downloads:

vpnportal.um.v2.tgz | 421 KB

WiFi SSID Switch

Categories:V2
Version:1.0.5
Release date:
27.09.2018
Description:

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

Downloads:

wifi_ssid_switch.v2.tgz | 18 KB

WiFi_SSID_Switch_Application_Note_20200618.pdf | 1 MB

WiFi STA Relay

Categories:V2
Version:1.3.0
Release date:
01.10.2020
Description:

Transparent mode (WiFi interface in client mode bridged to ETH).

Downloads:

wifi_relay.v2.tgz | 28 KB

wM-BUS CONCENTRATOR

Categories:V2
Version:1.1.1
Release date:
27.09.2018
Description:

Data processing from Wireless M-Bus meters. XML files are used for this purpose.

Downloads:

wMBusConc.v2.tgz | 18 KB

wM-BUS_Concentrator_Application_note_20200618.pdf | 1 MB

WoLGateway

Categories:V2
Version:1.1.1
Release date:
27.09.2018
Description:

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

Downloads:

WoLGateway.v2.tgz | 12 KB

WoL_Gateway_Application_note_20200618.pdf | 1019 KB

XCCNT_Update

Categories:V2
Version:1.0.0
Release date:
25.10.2017
Description:

Allows to reconfigure CNT board directly inside of router (intended for v2 routers only). There are three possible congurations:

  • 4x BI
  • 3x BI + 1x CNT
  • 2x BI + 2x CNT
Downloads:

xccnt_update.v2.tgz | 35 KB

Zabbix Agent

Categories:V2
Version:5.0.31
Release date:
01.02.2021
Description:

This is UM can be used as a SW agent for Advantech routers to support Zabbix network monitoring platform.

Downloads:

zabbix_agent.v2.tgz | 928 KB

Zabbix_Integration_Guide_Application_Note_20210226.pdf | 2 MB

zbx_conel_templates.xml | 59 KB