Starts hostapd on selected ethernet ports and blocks all traffic, except the MAC addresses that get authenticated via the 802.1X protocol.

eth1x_auth.v3.tgz

802.1X_Authenticator_Application_Note_20200708.pdf

Emulation of telephone modem behavior.

atModemEmulator.v3.tgz

AT_Modem_Emulator_Application_Note_20200618.pdfEnglish

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

azure_iot_sdk_python.v3.tgz

Azure_IoT_SDK_Python_Application_note_2020618.pdfEnglish

Allows Advantech routers to connect to Azure IoT (Microsoft’s end-to-end IoT platform). It is necessary to install the Python3 user module along with the Azure IoT SDK Python user module. Python3 is required for Azure IoT SDK Python to work – it is the separated module and it can be used as a standalone Python3 for other purposes.

azure_iot_sdk_python_v2.v3.tgz

Azure_IoT_SDK_Python_Application_note_20200225.pdfEnglish

Allow users to specify at least Primary and Backup APN for the first SIM card and switch between them in case that connection failed or connection is not established in specified time.

backup_apn.v3.tgz

Backup_APN_Application_Note_20200630.pdf

Allows user to restrict the portfolio of frequency bands that are supported by our routers.

bandsel.v3.tgz

BandSelect_Application_note_20200618.pdfEnglish

Provides a service called captive portal on routers. Landing page, QoS and monitoring of users on WiFi interface.

captive_portal.v3.tgz

Agent for Cumulocity IoT cloud platform.

cumulocity.v3.tgz

Cumulocity_Agent_Application_note_20200618.pdf

Command line tool and library for transferring data with URLs. This is part of our FW since version 5.0.0!

curl.v3.tgz

This module allows the user to change the logo displayed in the header of the web interface.

customerlogo.v3.tgz

Customer_Logo_Application_Note_20200618.pdfEnglish

Configurable daily router reboot.

dailyReboot.v3.tgz

DailyReboot_Application_note_20200618.pdfEnglish

Allows the router I/Os to act like DNP3 slave device.

dnpOut.v3.tgz

DNP3_Outstation_Application_note_20200618.pdfEnglish

Provides secure (encrypted) connection between two LAN networks.

easyVpn.v3.tgz

EasyVPNclient_Application_note_20200618.pdfEnglish

Ethernet Mirroring is used for port mirroring to monitor and analyze the incoming and outgoing traffic during RTU P2P test and trouble shooting. This UM is compatible with FW 6.1.8 and newer.

eth_mirror.v3.tgz

Ethernet_Mirroring_Application_Note_20200618.pdfEnglish

Detects physical disconnection of an Ethernet cable and drops eth0 interface.

ethernet_port.tgz

Ethernet_Port_Detector_Application_note_20200618.pdfEnglish

Adds the ability to create ext4 file systems, check them and mount them. Intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer. This user module is intended only for SmartFlex and SmartMotion routers with FW 5.3.4 or newer.

ext4_tools.v3.tgz

Ext4_tools_Application_note_20200618.pdfEnglish

Periodic sending System log and Report files to the selected email address or FTP server.

fileUploader.v3.tgz

File_Uploader_Application_note_20200618.pdfEnglish

Firmware Over-The-Air (FOTA) user module allows router to wirelessly upgrade and update the operating firmware of a cellular module. Currently, only a few cellular modules are supported.

fota.v3.tgz

FOTA_Step_by_Step_20190131.pdfEnglish

Firmware_Over-The-Air_Application_Note_20200618.pdfEnglish

You can use GDB to debug programs written in C, C++. GDB is invoked with the shell command gdb. Once started, it reads commands from the terminal until you tell it to exit with the GDB command quit. You can get online help from gdb itself by using the command help.

gdb.v3.tgz

GPS/GNSS receiver support.

gps.v3.tgz

GPS_Application_note_20200618.pdfEnglish

Client that runs inside Advantech routers, to enable them to connect with SmartWorx Hub.

hmpclient.v3.tgz

Allows user to embed information banner ahead of the login form.

httpBanner.v3.tgz

HTTP_Banner_Application_note_20200618.pdfEnglish

IPSec-Tools is used for IPsec configuration. This user module uses Racoon instead of OpenSwan.

ipsec_tools.v3.tgz

Layer-2 protocols in a pseudo-wire configuration.

l2tpPseudowire.v3.tgz

Allows filtering based on defined list of MAC addresses.

l2fw.v3.tgz

Layer_2_Firewall_Application_Note_20200618.pdfEnglish

Virtual interface for management. 

loopback.v3.tgz

Loopback_Application_Note_20200618.pdfEnglish

Supports scripting language that combines simple procedural syntax with powerful data description constructs based on associative arrays and extensible semantics.

lua.v3.tgz

lualibmodbus.v3.tgz

Midnight Commander is a visual file manager (console application with a text user interface). The main interface consists of two panels which display the file system. 

mc.v3.tgz

Reads Modbus RTU slaves and uploads data to SFTP server.

modbus_logger.v3.tgz

Modbus_Logger_Application_note_20200618.pdfEnglish

Data aggregation using more WAN connections (requires third party server).

modBond.v3.tgz

Extends NAT configuration options by SNAT (Source NAT) and DNAT (Destination NAT). There is 32 + 32 NAT rules.

nat.v3.tgz

NAT_Application_Note_20200619.pdfEnglish

User module NetFlow/IPFIX is determined for monitoring network traffic. NetFlow enabled routers have a probe that collects IP traffic information and submits them to a NetFlow collector and analyzer.

netflow.v3.tgz

NetFlow-IPFIX_Application_Note_20200729.pdfEnglish

This user module provides TCP and UDP scan.

nmap.tgz

NMAP_Application_note_20200618.pdfEnglish

Node-RED is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways.

nodered.v3.tgz

Node_RED_Application_Note_20200618.pdfEnglish

You can do the basic ftp commands LIST, GET, PUT and DELETE on a ftp server with this node. For detailed description see the Node-RED Application Note above.

noderedftp.v3.tgz

GPSd node receives the GPS events as payload via gpsd daemon. You can filter which events you are interested in. For detailed description see the Node-RED Application Note above.

noderedgpsd.v3.tgz

This node compresses an open node payload or decompress a compressed node payload by gzip compression. For detailed description see the Node-RED Application Note above.

noderedgzip.v3.tgz

Adding this user module to the router will add the knx device, knx out and knx in nodes to the iot node list. These nodes add KNXnet/IP support for Node-RED so it is possible to talk to KNX both in raw form and as higher level devices. KNX is an open standard for commercial and domestic building automation. For detailed description see the Node-RED Application Note above.

noderedknx.v3.tgz

Contains the nodes for working with Modbus, both the serial and TCP variants. You can read the values from a device and update a device state via a serial line. With TCP client you can read the registred values and write to a coil or a register. For detailed description see the Node-RED Application Note above.

noderedmodbus.v3.tgz

Contains the MQTT Broker node to create a MQTT server for your IoT. The client nodes are part of the base Node-RED module. For detailed description see the Node-RED Application Note above.

noderedmqtt.v3.tgz

Allows Node-RED to publish a node payload to Splunk's HTTP Event Collector. For detailed description see the Node-RED Application Note above.

noderedsplunk.v3.tgz

Node.js is a JavaScript runtime built on Chrome's V8 JavaScript engine. Node.js uses an event-driven, non-blocking I/O model that makes it lightweight and efficient. For detailed description see the Node-RED Application Note above.

nodejs.v3.tgz

Node.js_Application_Note_20200618.pdfEnglish

Time synchronization using NTP version 4 protocol. The module includes support for client and server operations as detailed in IETF RFC 5905.

ntp.v3.tgz

Gains a more accurate location via Ntrip protocol. Each router which has enabled the user module can be considered as Ntrip Client.

ntripClient.v3.tgz

NtripClient_Application_note_20200618.pdfEnglish

OpenVPN Custom Config user module can be used to configure up to four another OpenVPN tunnels on the router.

openvpn_custom_config.v3.tgz

OpenVPN_Custom_Config_Application_note_20200618.pdfEnglish

Allows to run one resettable and one non-resettable time counter for each binary input of the router.

ophrscounter.v3.tgz

Operational_Hours_Counter_Application_note_20200618.pdfEnglish

Duplicates data flow to more targets (up to seven different connections).

packetSplitter.v3.tgz

Packet_Splitter_Application_note_20200618.pdfEnglish

Allows to send SMS messages longer than standard of 160 characters.

pduSMS.v3.tgz

pduSMS_Application_note_20200618.pdfEnglish

Manually or automatically verifies functionality of connection between Smart Router and a device eventually of two devices. Ping and traceroute are used for this purpose.

pinger.v3.tgz

Pinger_Application_note_20200618.pdfEnglish

CONEL_AVAILABILITY_MIB.my

Establishes connection via PPP between router and device on serial line.

pppGateway.v3.tgz

PPPGateway_Application_note_20200618.pdfEnglish

Converts data from Mitsubishi ALPHA2 to Modbus TCP.

alpha.v3.tgz

ALPHA-MODBUS_application_note_20200618.pdfEnglish

Adds support of the BGP routing protocol which allows to route between autonomous systems.

bgp.v3.tgz

BGP_Application_note_20200618.pdfEnglish

Converts DF1 serial protocol to TCP/IP.

abcsp2df1.v3.tgz

DF1-Ethernet_Application_note_20200618.pdfEnglish

Converts IEC101 serial protocol to IEC104 IP protocol.

iec14.v3.tgz

Protocol_IEC_101-104_Application_Note_20200618.pdfEnglish

Adds support of the IS-IS routing protocol. The IS-IS is a link state protocol which means that information about the topology is exchanged between the nearest neighbours in a flood way (flooding).

isis.v3.tgz

IS-IS_Application_note_20200618.pdfEnglish

Converts Modbus RTU messages to TCP and caching messages to external Flash memory.

rtu2tcp.v3.tgz

Modbus_RTU2TCP_Application_note_20200618.pdfEnglish

Converts serial protocol Modbus RTU from more Modbus slaves and mapping their data to one Modbus TCP connection.

rtuMap.v3.tgz

RTUMAP_Application_note_20200618.pdfEnglish

Converts serial protocol Modbus RTU to Modbus TCP, routers I/Os can act like Modbus slave device.

tcp2rtu.v3.tgz

Modbus_TCP2RTU_Application_note_20200618.pdfEnglish

The Next Hop Resolution Protocol (NHRP) plays a role in Dynamic Multipoint Virtual Private Network. A limitation of NHRP is its inability to improve multicast protocols.

nhrp.v3.tgz

DMVPN_Application_Note_20181129.pdfEnglish

Adds support of the OSPF routing protocol. The OSPF is a link state protocol which means that routers maintain a map of the network (link state database) that is updated after any change to the network topology.

ospf.v3.tgz

OSPF_Application_note_20200618.pdfEnglish

Adds support of the PIM-SM multicast routing protocol.

pimSM.v3.tgz

PIM-SM_Application_note_20200618.pdfEnglish

Adds support of the RIP routing protocol. The RIP is a distance-vector protocol which means that routers do not know the entire network topology.

rip.v3.tgz

RIP_Application_note_20200618.pdfEnglish

Sends queries from the AMR (Automatic Meter Reading) system to a meter through an IP network using the router as a gateway.

suiteHT.v3.tgz

Suite_HT_Application_note_20200618.pdfEnglish

Supports programming language Python 2.x.

python.v3.tgz

Supports programming language Python 3.x.

python3.v3.tgz

SCEP is a PKI communication protocol. The goal of SCEP is to support the secure issuance of certificates to network devices in a scalable manner, using existing technology whenever possible.

scepClient.v3.tgz

SCEP_Client_Application_note_20200618.pdfEnglish

Regular sending of System log and Report files to the specified email or FTP server.

sendReport.v3.tgz

SendReport_Application_note_20200618.pdfEnglish

This module provides a way for a user to connect from a network connection to a serial port.

ser2net.v3.tgz

Serial_to_network_proxy_App_note_20200618.pdfEnglish

Allows connecting of the serial line device and TCP Server or Servers. Communication in both ways – serial to TCP and TCP to serial – is possible.

serial2tcp.v3.tgz

Serial2TCP_Application_note_20200618.pdfEnglish

Service Access Limitation of HTTP, FTP, SSH... on particular interfaces.

service_acl.v3.tgz

Switch the router into Low Power Mode and wake it up. Advanced options based on binary inputs and time.

sleepmode.v3.tgz

Sleep_Mode_Application_Note_20200618.pdfEnglish

Adds the ability to use the router as an SSH client. This means that the module allows to establish the SSH connection to the remote router and execute commands on it.

sshclient.tgz

SSHclient_Application_note_20200618.pdfEnglish

Creates an encrypted network tunnel. Encryption data is wrapped in SSL.

stunnel.v3.tgz

Stunnel_Application_note_20200618.pdfEnglish

Check of the TCP connection with a defined IP address.

tcpsynka.v3.tgz

TCP_SYN_Keep-Alive_Application_note_20200618.pdfEnglish

Mobile WAN IP address is transferred to connected device on ETH (router is invisible from WAN side).

transparentMode.v3.tgz

TransparentMode_Application_note_20200618.pdfEnglish

This user module can be used for blocking specific URLs on WiFi interface.

url_blocker.v3.tgz

URL_Blocker_Application_Note_20200618.pdfEnglish

Integrates Eltima libraries into USB over Ethernet solution

usbip_eltima.v3.tgz

USB-IP Eltima_Application_Note_20200618.pdfEnglish

Vim is a highly configurable text editor for efficiently creating and changing any kind of text.

vim.v3.tgz

Connects the router to WebAccess/VPN, see WebAccess/VPN Software product page.

vpnportal.v3.tgz

This user module allows executing of shell commands on a router over standard HTTP(S) connection.

webTerm.v3.tgz

Client that runs inside Advantech routers, to enable them to connect with WebAccess/DMP.

wadmp_client_2.0.4.v3.tgz

Allows the router to switch automatically between up to four SSIDs – WiFi networks.

wifi_ssid_switch.v3.tgz

WiFi_SSID_Switch_Application_Note_20200618.pdfEnglish

Transparent mode (WiFi interface in client mode bridged to ETH).

wifi_relay.v3.tgzEnglish

Data processing from Wireless M-Bus meters. XML files are used for this purpose.

wMBusConc.v3.tgz

Listens to communication on the selected UDP port and forward these packets to appropriate address as a broadcast.

WoLGateway.v3.tgz

WoL_Gateway_Application_note_20200618.pdfEnglish